specification control drawing tyco electronics corporation 300 constitution drive, menlo park, ca. 94025, u.s.a. raychem title: duraseal blade terminal unless otherwise specified dimensions are in millimeters. [inches dimensions are shown in brackets] document no.: b-106-4xxx tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron tyco electronics reserv es the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. prod. rev.: see table doc. issue: 8 date: 8-jul-03 prepared by: mforonda replaces: d030190 . dcr number: d030372 cage code : 06090 scale: none size: a sheet: 1 of 1 if this document is printed it becomes unc ontrolled. check the latest revision product revision product dimens ions wire dimensions ?g product name ?a min b nom c nom l max color (1) size range mm 2 (awg) min max b-106-4631 b 4.0 (0.155) 6.35 (0.250) 0.8 (0.030) 32.0 (1.260) red 0.5 - 1.0 (awg 22-18) 1.4 (0.055) 4.0 (0.155) B-106-4632 b 4.6 (0.180) 6.35 (0.250) 0.8 (0.030) 33.0 (1.300) blue 1.5 - 2.5 (awg 16-14) 2.0 (0.080) 4.6 (0.180) materials 1. insulation sleeve: heat-shrinkable, transparent color (1), radiation cross-linked modified polyamide with thermoplastic adhesive coating inside. 2. blade terminal: tin-plated brass. base metal: c260 brass. plating: tin-plated per astm b545, class a. application 1. these controlled crimp devices are desi gned to terminate a tin-plated or bare c opper stranded wire having an insulation rate d for at least 75 c to a blade terminal. it will provide a splash proof and strain relief connection. ul listed wire connector 3z11. 2. temperature range: -55 c to +125 c. 3. for application tooling and installation, see rpip-684-00. for best results, prepare the wire as shown:
|